Automated programs support all battery needs
The 18 service programs are grouped into Basic, Advanced and Custom.
Basic Programs
- Auto – Exercises the batteries and applies Recondition if the user-set target capacity cannot be reached.
How to prevent memory
Cost savings with battery maintenance - Charge – Applies a fast charge only.
- Prime – Prepares batteries for field use by repeated cycling until the maximum capacity is reached.
- QuickSort™ – Sorts lithium-ion packs into Good, Low and Poor in 30 seconds.
- Self-Discharge – Determines the rate at which a battery loses charge.
- Life Cycle – Counts number of charge/discharge cycles before the battery capacity drops to selected target level.
- Discharge Only – Discharges battery for storage; tests chargers.
- Extended Prime – Applies a 16-hour trickle charge, followed by Prime. Prepares difficult to charge batteries.
- OhmTest – Measures internal battery resistance in 6 seconds.
- Runtime – Simulates field application with three adjustable load currents and time intervals.
- Boost – Reactivates seemingly dead batteries that have been discharged too low.
- QuickTest™ – Provides battery state-of-health in 3 minutes. Needs specific battery matrix.
- Q-Learn – Provides initial QuickTest™ matrix by scanning a good battery. Service time is 3-5 minutes.
- Learn – Improves QuickTest™ matrix by scanning batteries with different state-of-health status. Service time is 3-8 hours per battery.
Four separate Custom programs allow user-defined programs composed of charge, discharge, recondition, wait and repeats. The programs follow a different path if a certain condition occurs.
Restores weak batteries, prolongs battery life and improves system reliability; pays back in one year by lowering operating costs.
Find out more about how Cadex Battery Analyzers can help in these applications:
Find out more about how Cadex Battery Analyzers can help in these applications:
