Spectro CA-12™ for Floor Cleaning
Checks battery capacity in 15 seconds
So you started the engine... but do you have enough power for the accessories? The Spectro CA-12 detects early supply problems by measuring capacity, CCA and state-of-charge.
- Reads capacity, CCA and state-of-charge
- Tests battery in 15 seconds
- Get consistent electronic results
Capacty is Key
Spectro™ (Multi-model electrochemical impedance spectroscopy) opens the door to an entirely new way of battery testing. Instead of measuring capacity by discharging, the Spectro CA-12 injects 24 excitation frequencies and analyses the fine nuances to get a full picture of the battery. Harmful and time consuming discharges are a thing of the past.
How does this apply to my batteries?
Conventional battery testers rely on conductance or load checks. While these systems can verify current flow, capacity is unknown.
In addition to capacity, the leading health indicator, Spectro CA-12 provides impedance (Z) and state-of-charge (SoC) readings.
Why was this not done earlier?
Electrochemical impedance spectroscopy has been in use for many years but equipment size, high cost and long test times made the technology prohibitive outside a laboratory environment. Spectro CA-12 solved this with a high-speed DSP that compiles 40 million transactions during the short test. The key to Spectro, however, lies in the patented algorithm.
Easy to Use

Simply connect the Spectro CA-12 to the battery terminals and read the test results. The batteries don't need to be disconnected or fully charged. If below 40% SoC, the unit prompts to charge and retest. The Spectro CA-12 also reads CCA of starter batteries.
Simple User Interface
The CA-12 shows the results in numeric and graphic formats. In
Vehicle Mode you can read the capacity and SoC of individual batteries.
Superior in All Aspects
- Fast: The 15-second test eliminates the need to discharge. This allows more frequent battery testing, enhancing dependability.
- Safe: There is no heat, sparks or fumes. You can use the CA-12 continuously without cool-downs.
- Simple: Requires minimal technical knowledge. Reverse polarity and high voltage protection prevent damage; rubberized housing avoids breakage.
- Economical: Identifies low capacity batteries before a problem is noticed. This eliminates unexpected downtime and allows for scheduled replacements.
What are typical battery problems?
Many deep cycle batteries exhibit irregularities that conventional testers cannot find; the Spectro CA-12 spells them out in seconds. Some of these are:
Low Charge
CA-12 reads low SoC. Capacity estimation is correct in spite of low charge.
Low Capacity
Battery has good drive but short runtimes. CA-12 reads good impedance but low capacity.
Faulty Set
CA-12 finds low performing and shorted blocks in a string. Good batteries can be regrouped and reused.
Prints reports, interfaces with PC
The Spectro CA-12 comes with PC-Companion
software to store records, download test results, print reports and upgrade firmware. Includes RS232 and infrared link for the optional label printer.
 |
Spectro Product Page